Robe Robin 300E Spot Wireless DMX CRMX Especificações Página 1

1 Version1.4

10 Securing the xture via one safety wire Securing the xture via two safety wires1-Fixture2-Truss3-Clamp4-Mounting adapter5-Quarter-turn fastener

113.5 DMX-512 connectionThe xture is equipped with both 3-pin and 5-pin XLR sockets for DMX input and output.The sockets are wired in parallel.Only

123.6 Ethernet connectionThe xtures on a data link are connected to the Ethernet with ArtNet communication protocol.The control soft-ware running on

13Ethernet / DMX operationOptions “Ethernet/DMX” has to be selected from the “Ethernet Mode” menu on the rst xture (connected to the Ethernet) in th

144. Control menu mapDefault settings=Bold printTab Level 1 Level 2 Level 3 Level 4 Level 5 Level 6Addressing Settings DMX Address 001-255 Ether

15Tab Level 1 Level 2 Level 3 Level 4 Level 5 Level 6Tilt Reverse Off, OnPan/Tilt Feedback Off, OnPan/Tilt mode TimeSpeedTilt Movemement rangeStand.R

16Tab Level 1 Level 2 Level 3 Level 4 Level 5 Level 6Edit Program Steps Step 1 Pan (0-255): :: Dimmer Fine (0-255): Step Time (0-25.5s)Step 100Pan (0-

175. Robin 300 LEDWash - DMX chartVersion 1.0Mode/ChannelValue Function Type of control1 2 3 4 51 1 1 1 10-255Pan (8 bit)Pan movement by 450° proporti

18Mode/ChannelValue Function Type of control1 2 3 4 58 - - - 150-255Red ne (16 bit) - zone 1 Fine red LEDs saturation control proportional9 - - - 16

19Mode/ChannelValue Function Type of control1 2 3 4 532 16 12 7 130 1-234-567-910-1213-151617-555657 - 959697 – 134135136 - 174175176 -214215216 - 246

2Table of contents1. Safety instructions ... 32.

205.1 Virtual colour wheel - colour mixing chartRobin 600 LED Wash - Virtual Colour Wheel Scale*Virtual Colour Wheel Red Green Blue WhiteDMXDMXDMXDMX

21Robin 600 LED Wash - Virtual Colour Wheel Scale*Virtual Colour Wheel Red Green Blue WhiteDMXDMXDMXDMXDMX64 0 255 183 065 0 255 174 066 0 255 165 06

22Robin 600 LED Wash - Virtual Colour Wheel Scale*Virtual Colour Wheel Red Green Blue WhiteDMXDMXDMXDMXDMX119 104 255 0 0120 110 255 0 0121 119 255 0

23Robin 600 LED Wash - Virtual Colour Wheel Scale*Virtual Colour Wheel Red Green Blue WhiteDMXDMXDMXDMXDMX174 255 3 0 0175 255 0 0 0176 255 0 3 0177

24Robin 600 LED Wash - Virtual Colour Wheel Scale*Virtual Colour Wheel Red Green Blue WhiteDMXDMXDMXDMXDMX229 129 0 255 0230 119 0 255 0231 110 0 255

256. Control menu The Robin 300 LEDWash Light is equipped with the QVGA Robe touch screen with battery backup which allows to set the xture´s behavi

26Touch any part of the screen or press the [ENTER/Display On] button to display the initial screen with the cur-rent stored DMX address: Touc

276.2 Tab "Information"Fixture Times - The menu provides readouts of xture operation hours. Power On Time Hours - Select this menu to re

286.3 Tab "Personality"User mode - The Robin 300 LEDWash allows you to recall up to 3 user settings. After switching the xture on for the 

29Screen Settings - Use this menu to change the touch screen settings. Display Intensity - The item allows to control the intensity of the screen (1

3FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLYBEFORE POWERING OR INSTALLING YOUR ROBIN 300 LEDWASH !Save it for future reference.This de

30Music Trigger - Use the item to activate the sound control of the running program via the built-in micro-phone.Preset Playback - T

316.6 Tab "Service"Adjust DMX Values - The menu allows you to set all effects to desired positions before ne calibration of the effects .Ca

32yourself and ask for help your ROBE distributor.Note 2: DMX address, IP address, programs 1-3 and all items in the menu "Personality" will

33SENSOR_VALUE *DISPLAY_INVERT * *DISPLAY_LEVEL * *PAN_INVERT * *TILT_INVERT * *DEVICE_RESET *DMX_PERSONALITY * *DMX_PERSONALITY_DESCRIPTION *STATUS_M

3410. Technical SpecicationsElectrical Power supply:...electronic auto-ranging Input voltage range:... supply

35 Support of RDM (Remote Device Management) 5 DMX modes (37, 21, 15, 10, 37 control channels)Wireless DMX/RDM module (only for Wireless DMX ver

36 Mounting adapter Accessories Mounting adapter (No.99013318)...1 piece Optional accessories Top hat -black (No.10980102)

3712. Photometric diagrams

38

39

4When choosing the installation spot, please make sure that the xture is not exposed to extreme heat, moisture or dust.Air vents and slots in the xt

52. Fixture exterior view Rear panel of the base:6 - Moving head7 - Fan 8 - Yoke 9 - Ethernet input 10 - 5-pin DMX IN 11 - 5-pin DMX OUT 12 - 3-p

63. Installation Fixtures must be installed by a Qualied electrician in accordance with all national and local electrical and const

73.2 Installing the top hatSwitch off the xture before top hat installation1. Go to the xture menu and set reduced tilt movement (Personality -->

83.3 Installing the eggcrateSwitch off the xture before top hat installation1. Unscrew the four fastening screws (1) which securing top ange (2) to

93.4 Rigging the xtureThe installation of the xture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without